Date: Fri, 23 Dec 2005 10:56:28 EST From: kc3vo@aol.com Subject: Menu I hope you used a precise, 13.8 volt power source while accessing the menu! If not, the calibration may be different, although the displayed calibration values are as they were, and this is due to the fact that 13.8 volts is used as the REFERENCE for all these values! To confirm accuracy, check the radio front-panel VOLTAGE display, to see if it reads 13.8 volts when the radio is powered, in receive mode, from EXTERNAL 13.8 volts.-73, KC3VO-Bob. ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ========================================================================== ==========================================================================